礁坪上波浪传播的数值模拟     

何栋彬  房克照  孙家文  刘忠波 《海洋通报》2018,(2):129-138

本文基于具备间断捕捉能力的二阶全非线性Boussinesq数值模型,对规则波和随机波在礁坪地形上的传播变形进行了数值模拟。该模型采用高阶有限体积法和有限差分方法求解守恒格式的控制方程,将波浪破碎视为间断,同时采用静态重构技术处理了海岸动边界问题。重点针对礁坪上波浪传播过程中的波高空间分布和沿程衰减,礁坪上的平均水位变化,以及波浪能量频谱的移动和空间差异等典型水动力现象开展数值计算。将数值结果与实验结果对比,两者吻合情况良好,验证了模型具有良好的稳定性,具备模拟破碎波浪和海-岸动边界的能力,能较为准确地模拟波浪在礁坪地形上的传播过程中发生的各种水动力现象。  相似文献   

圆柱形支撑大跨度建筑结构强震冲击分析模型仿真   总被引：3，自引：2，他引：1       下载免费PDF全文

吴海波  王新妮 《地震工程学报》2018,40(1):48-53

圆柱形支撑大跨度建筑稳定性较差,不能在强震冲击下保持稳定的结构状态。为解决此问题,设计圆柱形支撑大跨度建筑结构强震下冲击分析仿真模型,通过圆柱分析法则的确定、有限元支撑模拟分析与监测、圆柱形支撑体系承载能力分析以完成模型的仿真分析与监测。基于此对大跨度建筑结构强震冲击进行静力分析,调整强震冲击下模型的结构,完成模型的搭建。模拟强震冲击环境,设计对比实验结果表明,应用圆柱形支撑大跨度建筑结构强震下冲击分析仿真模型,可明确圆柱形支撑大跨度建筑薄弱点,发现稳定性较差建筑结构单元,达到提升圆柱形支撑大跨度建筑在强震冲击下稳定性的目的。  相似文献   

常Q滞弹性介质地震波动数值模拟——时域本构优化逼近          下载免费PDF全文

谢志南  郑永路  章旭斌 《地球物理学报》2018,61(10):4007-4020

在地震波动模拟中计入常Q滞弹性阻尼，可有效降低模拟波形的误差.就时域有限差分和有限元模拟而言，常基于广义标准线性体建立阻尼介质的时域本构逼近.广义标准线性体由若干标准线性体并联得到，增加标准线性体个数能有效提高模拟精度，但计算量及计算存储将成倍增长.目前尚未有普适的标准线性体个数优化取值方案.本文基于广义标准线性体参数的非线性优化拟合方法，详细分析了时域本构逼近误差的影响因素，清楚揭示了逼近误差仅取决于频带宽度，与频带上下限取值无关这一特性，阐明了构建具有普适性标准线性体个数优化取值方案的可行性.论证了波形模拟精度主要取决于波传播距离与模拟波长的比值以及标准线性体的个数取值.综合考虑上述两个控制因素，结合在波动正反演问题中广为采纳的波形时频误差衡量准则，对不同Q值介质给出了标准线性体个数优化取值表.进一步，本文提出采用不同个数标准线性体以近似不同Q值的阻尼介质时域本构，解决了以往波动数值模拟中统一采用相同个数标准线性体而导致的计算量及计算存储浪费或模拟精度低下等问题，并基于数值实验验证了这一方法的精度.本文工作对推进滞弹性介质波动数值模拟及其在全波形反演问题中的应用具有理论价值和实践意义.  相似文献   

A simple strategy for dynamic substructuring: I. Concept and development     

Aikaterini Stefanaki  M. V. Sivaselvan 《地震工程与结构动力学》2018,47(9):1801-1822

Dynamic substructuring refers to physical testing with computational models in the loop. This paper presents a new strategy for such testing. The key feature of this strategy is that it decouples the substructuring controller from the physical subsystem. Unlike conventional approaches, it does not explicitly include a tracking controller. Consequently, the design and implementation of the substructuring controls are greatly simplified. This paper motivates the strategy and discusses the main concept along with details of the substructuring control design. The focus is on configurations that use shake tables and active mass drivers. An extensive experimental assessment of the new strategy is presented in a companion paper, where the influence of various factors such as virtual subsystem dynamics, control gains, and nonlinearities is investigated, and it is shown that robustly stable and accurate substructuring is achieved.  相似文献   

Coordinative similitude law considering fluid‐structure interaction for underwater shaking table tests     

Zhong‐Xian Li  Kun Wu  Yundong Shi  Ning Li  Yang Ding 《地震工程与结构动力学》2018,47(11):2315-2332

Generally, when a model is made of the same material as the prototype in shaking table tests, the equivalent material density of the scaled model is greater than that of the prototype because mass is added to the model to satisfy similitude criteria. When the water environment is modeled in underwater shaking table tests, however, it is difficult to change the density of water. The differences in the density similitude ratios of specimen materials and water can affect the similitude ratios of the hydrodynamic and wave forces with those of other forces. To solve this problem, a coordinative similitude law is proposed for underwater shaking table tests by adjusting the width of the upstream face of the model or the wave height in the model test to match the similitude ratios of hydrodynamic and wave forces with those of other forces. The designs of the similitude relations were investigated for earthquake excitation, wave excitation, and combined earthquake and wave excitation conditions. Series of numerical simulations and underwater shaking table tests were performed to validate the proposed coordinative similitude law through a comparison of coordinative model and conventional model designed based on the coordinative similitude law and traditional artificial mass simulation, respectively. The results show that the relative error was less than 10% for the coordinative model, whereas it reached 80% for the conventional model. The coordinative similitude law can better reproduce the dynamic responses of the prototype, and thus, this similitude law can be used in underwater shaking table tests.  相似文献   

察尔汗盐湖西北部典型采区地下卤水赋存状态的地面核磁探测与数值模拟研究          下载免费PDF全文

张光武  易磊  高泽永  韩凤清  陈富洪  马喆  卢晓航  刘小宝  韩光  袁文虎  刘溪溪 《盐湖研究》2020,28(1)

察尔汗盐湖地下晶间卤水蕴藏了宝贵的盐湖矿产资源,如何确定地下卤水的赋存规律以制定科学合理的卤水开采和补给方案,正成为盐湖资源大规模可持续利用亟需解决的重要问题。本文以察尔汗盐湖西北部的典型采卤区作为研究区域,1)利用新型的地面核磁共振找水仪,通过在研究区布设两条十字交叉的测线,探测并反演解译测区地下60米深度内的卤水静态赋存形式,2)结合OpenGeoSys(OGS)多物理场耦合地下水数值模拟软件,对测区地下卤水的动态运移形式进行数值模拟计算。地面核磁探测结果表明研究区含水量整体偏低,最大含水量约0.8%,平均含水量约0.4%。测点结果给出的含水层位分界面与邻近钻孔的地层层位分界面的一致性较高,浅部的层位误差在10%以下,达到了0.5米的精度。考虑到测区南北两边均有采卤渠正在汲取地下卤水,且在测区中心存在两条废弃的采卤渠,OGS地下水数值模拟研究结果表明采卤渠造成测区浅部卤水较大空缺,与研究区浅部含水量总体偏低的探测特征一致。研究结果表明地面核磁共振技术能准确探测卤水当前的赋存状态,地下水运移模拟技术可以深入认识采补活动引起卤水赋存状态的变化规律。探测和模拟结合的联合研究是确定卤水赋存规律的重要手段,研究成果可为盐湖资源合理开采高效利用提供基础资料和相关科学支撑。  相似文献   

城镇化与生态环境耦合的动态模拟——研究进展与展望     

崔学刚  方创琳  刘海猛  刘晓菲  李咏红 《地理学报(英文版)》2020,30(2):333-352

Urbanization and eco-environment coupling is a research hotspot.Dynamic simulation of urbanization and eco-environment coupling needs to be improved because the processes of coupling are complex and statistical methods are limited.Systems science and cross-scale coupling allow us to define the coupled urbanization and eco-environment system as an open complex giant system with multiple feedback loops.We review the current state of dynamic simulation of urbanization and eco-environment coupling and find that:(1)The use of dynamic simulation is an increasing trend,the relevant theory is being developed,and modeling processes are being improved;(2)Dynamic simulation technology has become diversified,refined,intelligent and integrated;(3)Simulation is mainly performed for three aspects of the coupling,multiple regions and multiple elements,local coupling and telecoupling,and regional synergy.However,we also found some shortcomings:(1)Basic theories are inadequately developed and insufficiently integrated;(2)The methods of unifying systems and sharing data are behind the times;(3)Coupling relations and the dynamic characteristics of the main driving elements are not fully understood or completely identified.Additionally,simulation of telecoupling does not quantify parameters and is not systemically unified,and therefore cannot be used to represent spatial synergy.In the future,we must promote communication between research networks,technology integration and data sharing to identify the processes governing change in coupled relations and in the main driving elements in urban agglomerations.Finally,we must build decision support systems to plan and ensure regional sustainable urbanization.  相似文献   

南海北部海域油气资源调查技术及其应用研究——震源子波检测及模拟分析          下载免费PDF全文

曾宪军  翟继锋  韦成龙 《海洋技术学报》2019,38(2)

在野外采集中考察气枪的稳定性以及室内进行确定性子波反褶积处理,都要求能够获得气枪阵列的实时远场子波。从震源子波检测方法出发,阐述了近场子波采集、幅值转换及记录流程,并列举出实测近场子波时需要考虑解决的问题;接着介绍了震源远场子波的获取方法和主要途径;震源近场子波及远场子波的实测方案,检测震源子波所需的仪器设备和采集技术方法。文中分析了气枪子波的气泡干扰问题,虚反射与后续气泡震荡间的关系以及吸收衰减对子波的影响,并根据实测远场子波,对齐氏和范氏两种气体模型进行了模拟效果对比,结果表明:采用范氏气体模型所模拟的子波与实际子波更为吻合,模拟出的气枪的子波波形、振幅大小、气泡周期上,与业界通用的Nucleus软件的模拟结果吻合较好,在后续的使用中将继续优化。  相似文献   

隔震曲线梁桥不同等级地震的振动特性模拟分析          下载免费PDF全文

高菁阳 《地震工程学报》2020,42(3):607-612

曲线桥梁抗震特性模拟分析对于曲线桥梁隔震、减震有着重要意义。基于隔震曲线桥梁设计过程中的特点,通过非线性水平弹簧单元对铅芯橡胶支座双向非线性的能力进行模拟,根据SAP2000科学选择强震观测地震波,并考量曲线桥梁本身存在的特性对桥梁振动特性产生的影响,针对隔震曲线桥梁在不同等级地震下振动特征进行模拟分析,其中,通过隔震曲线桥梁铅芯橡胶支座模型的构建和梁桥不同等级地震计算模型、输入地震波与传感器量测等步骤得到的模拟结果为:不同地震波与加速度峰值输入过程中,地震动较小下的支座水平刚度比较大,且结构相对稳定;地震幅值增大时,桥梁支座水平刚度减小,且支座的恢复力位移滞回变化曲线面积比较大,能够更多地将地震输入能量消散掉,减小能量不断向曲线桥梁上方传递的速度,可有效减轻地震反应,起到隔震的效果。  相似文献   

Developing constitutive models from EPR‐based self‐learning finite element analysis          下载免费PDF全文

Ali Nassr  Akbar Javadi  Asaad Faramarzi 《国际地质力学数值与分析法杂志》2018,42(3):401-417

A constitutive model that captures the material behavior under a wide range of loading conditions is essential for simulating complex boundary value problems. In recent years, some attempts have been made to develop constitutive models for finite element analysis using self‐learning simulation (SelfSim). Self‐learning simulation is an inverse analysis technique that extracts material behavior from some boundary measurements (eg, load and displacement). In the heart of the self‐learning framework is a neural network which is used to train and develop a constitutive model that represents the material behavior. It is generally known that neural networks suffer from a number of drawbacks. This paper utilizes evolutionary polynomial regression (EPR) in the framework of SelfSim within an automation process which is coded in Matlab environment. EPR is a hybrid data mining technique that uses a combination of a genetic algorithm and the least square method to search for mathematical equations to represent the behavior of a system. Two strategies of material modeling have been considered in the SelfSim‐based finite element analysis. These include a total stress‐strain strategy applied to analysis of a truss structure using synthetic measurement data and an incremental stress‐strain strategy applied to simulation of triaxial tests using experimental data. The results show that effective and accurate constitutive models can be developed from the proposed EPR‐based self‐learning finite element method. The EPR‐based self‐learning FEM can provide accurate predictions to engineering problems. The main advantages of using EPR over neural network are highlighted.  相似文献